An additive developed for the restoration and protection of four-stroke engines, with a separate lubrication system. E.g. motorcycles, scooters, quads, etc.
Compound “MOTOTEC 4” is added to the working oil of the engine
Effects of applications
- Increases power
- Decreases fuel consumption
- Decreases oil consumption
- Decreases vibration and noise level
- Decreases exhaust CO/CH emissions
- Decreases hum in the gearbox and improves free car run
- Increases the lifetime
Compound “MOTOTEC 4” is added to the working oil of the engine in accordance with the following procedure:
- Warm up the engine to operating temperature
- Stop the engine
- Shake the can thoroughly until natural sediments (active components) are totally dissolved.
- Add tribotechnical compound in engine through the regular oil filling neck.
Apply ½ of the can only – if engine volume is less than 500 cm3.
Apply 1 can – if engine volume is more than 500 cm3.
- Start the engine at once after the procedure.
- Take a trip lasting 15-20 minutes in normal driving mode. After the procedure, you can use the car as usual.
Full engine treatment is performed as follow:
|Engine volume:||Less than 500 cm3||More than 500 cm3|
|1 stage:||1/2 can||1 can|
|Mileage: 300-400 km|
|Changing the oil and oil filter|
|2 stage:||1/2 can||1 can|
|Mileage 1000 km: full engine treatment|