Atomium Mototec 2

£18.95 £18.95

An additive developed for the recovery and protection of two-stroke engines, with a common or separate lubrication system. E.g. mower, sawmill, mopeds, boats etc.

Availability: In stock

An additive developed for the recovery and protection of two-stroke engines, with a common or separate lubrication system. E.g. mower, sawmill, mopeds, boats etc.

Instructions

Compound “MOTOTEС 2” is added to the working oil of the engine

Effects of applications

  • Increases power
  • Decreases vibration and noise level
  • Increases  engine lifetime

Application

Compound “MOTOTEC 4” is added to the working oil of the engine by the following procedure:

  1. Warm up the engine to operating temperature
  2. Stop the engine
  3. Shake the can thoroughly until natural sediments (active components) are totally dissolved.
  4. Add the compound in the engine through its regular oil filling neck.

Apply the half can only –  if engine has separate lubrication system.  Apply the compound at the rate of 5 ml of compound per 1 liter of oil – if engine has common lubrication system.

Start the engine and take a trip lasting 15-20 minutes in normal driving mode at once after the procedure.

Full engine treatment is performed as follows:

Lubrication system: separate common
1 stage: 1/2 can into
the oil tank
5 ml per 1 l fuel into the fuel tank
Work up to emptying the oil tank 5-6 working hours
Work on a clean oil up to emptying the oil tank 20 working hours on the clean fuel
2 stage: 1/2 can into
the oil tank
5 ml per 1 l fuel into the fuel tank
Work up to emptying the oil tank 5-6 working hours
Regular operation