Atomium Active Regular

£18.95 £18.95

For maintenance on already treated vehicles.

Availability: In stock

Description

For maintenance on already treated vehicles.

Effects of application

  • Increases engine lifetime
  • Facilitates start-up and protects during “cold start-up”
  • Engine rated brake power
  • Provides low fuel consumption
  • Provides low oil burn
  • Decreases vibration and noise level
  • Decreases exhaust CO/CH emissions

Application

Engine treatment with tribotechnical compound “Active Regular” is carried out after every regular oil change.  It is necessary to add compound to new motor oil in accordance with the following procedure:

  1. Warm up the engine to operating temperature (regular operation) and stop the engine.
  2. Shake the can with tribotechnical compound “Active Regular” thoroughly until natural sediments (active components) are totally dissolved.
  3. Add tribotechnical compound in engine through the regular oil filling neck.
  4. After applying the engine should run (it is recommended to drive the car) no less than 20 – 25 min. in mode of regular operation.

After the procedure you can use the car as usual.

Quantity of  compound is defined as follows:

ENGINE TYPE Oil volume in the oil pan
Gasoline engine Less than 5 liters More than 5 liters
1 can 2 cans
Diesel engine Less than 7 liters More than 7 liters
1 can 2 cans
  1. After applying the engine should run (it is recommended to drive the car) no less than 20 – 25 min. in mode of regular operation.

After the procedure you can use the car as usual.